奔达单代数的判别式.DOCVIP

PAGE: PAGE 1 OF NUMPAGES 4 COPY RIGHT: KMP TECHNOLOGY CO. LTD Users’ manual for Projector Motorized Lift A11 Brief introduction A11 projector motorized lift is the latest product of LEEMC Company. Double scissors configuration, screw rod direct driving. Its advantages are ultra-thin, stable running, nicely orientation, low noise, easy operation, handsome exterior. It is a good accessory for exact projector. It cay be hidden in the ceiling when it is out of use. You only need to press a button when you want to use the projector. After usage you can press the button and the projector will come back to the ceiling. It can not only give good protection to the projector and also save space. Dimension of the product 450*415*120 Dimension of the installation panel 430*415 Distance between the holes on the installation panel 400*385 Dimension of the decoration panel (and the height of the screw poles) 485*420*300 Distance between the holes on the decrocation panel 400*385 Maximum dimension of the projector 450*380*200 Minimum distance between the real and fake ceiling 400 Maximum running distance 300 Loading capacity 16 Net weight 26 Voltage 220V (actual size please see the product) Operation circumstance requirement: 1. the temperature between -10 oC ~+40oC; 2. humidity less than 95%; 3. away from the causticity air; 4. way from the organic solvent air and flammability air; 5. power voltage at 220V (±10%); 6. void hard shocking and hitting. Accessories: Projector panel for connecting and fixing the projector Universal claw using for adjusting the projector level, up and down, left and right. Remark: The height of projector supportation panel+universal claw is 80mm~130mm. (Different panel has different height) Installation steps: When installation, you should make sure to get the right position to install the lift according to the direction and position of the projector. First, make a hole in the fake ceiling or the table according to the size of the decorat