氯氢处理工段的设计说明书.pdfVIP

西宁地区年产1 万吨100%氢氧化钠氯氢处理工段工艺 初步设计 摘 要 该设计是在青海宜化化工有限责任公司烧碱车间毕业实习的基础上进行的氯氢处理工段工艺初 步设计。通过到公司现场实习和对比目前的氯氢处理工艺流程，最终确定了此设计的生产方案。本 设计的主要内容是按照计算要求搜集计算所用的基本数据，自然条件数据，对确定的工艺流程进行 过程原理分析，整理计算方法和计算公式，进行物料衡算和热量衡算。对过程关键设备进行工艺计 算和设备计算，以便对设备选型或得到非标准设备的特性参数，确定它们的基本参数和尺寸，同时 绘制了带控制点的工艺流程图、干燥塔设备装配图和设备平面布置图。 关键词 氯氢处理，工艺计算，干燥塔，板式换热器 THE PRELIMINARY DESIGN PROCESS ABOUT CHLORIDE AND HYDROGEN TREATMENT SECTION OF ANNUAL PRODUTION 10,000 TONS SODIUM HYDROXIDE IN XINING AREA Abstract The design is in Qinghai, YiHua Chemical Co, Ltd. Kenshin internship workshop production based on the chlorine and hydrogen technology to deal with the preliminary design section. The company through the internship site inspection and comparison of the chlorine and hydrogen to deal with the current process , and ultimately determine the production of this design program. The main elements of the design is a process determined by the principle of process analysis, collation and calculation method of calculating the formula, the calculation in accordance with the calculation of the requirements to collect the basic data used, data on natural conditions and to identify material balance and energy balance. Key equipment for the process of computing technology and equipment to carry out the calculation for the selection of equipment or of the characteristic parameters of non-standard equipment to determine their basic parameters and the size of the chlorine and hydrogeen at the same time protract the engineering flow sheet with the control point ;assermbling of Drying tower ; icomography of the workshop . Keywords Chloride and hydrogen treatmeatment, Process design calculation,