- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
PAGE
17 -
摘要
本文介绍了一种新型的数据传输系统:模拟量转换为数字量的红外数据传输系统。该系统主要是由模拟信号处理与调理模块、A/D转换模块、红外传输模块与信号显示模块等三大模块组成。本系统是基于LM324运算放大器、ADC0809转换器、8051单片机、555定时触发器、红外接收头TSOP1738以及数码显示管(DPY)等元件而设计的。具体设计的设计程序如下:首先将外界微弱的模拟信号进行转换、处理和调理以获得模拟的电信号并除去噪音;接着经A/D转换器将处理过的模拟信号转换为数字信号并传输到单片机中;然后由红外发射电路对数字信号解调,并经红外发射二极管发射出红外线,在另一端通过红外接收器接收红外线并解调为数字量;最后将数字信号传输到单片机中由发光二极管和数码管显示信号。
该系统可以将我们周围的各种模拟信号传输到计算机中,我们可以通过计算机对所关心的信号进行检测与控制,也可在屏幕上观测待测信号的变化趋势等等。本系统是利用红外线进行数据传输,让我们不仅可以处理一般的模拟信号,而且还可以在高压、强辐射、有毒气体等严峻环境下更为可靠而有效地检测工业设备参数。因此它在工农业生产、医疗卫生、军事、科研等领域的应用也将越来越广泛。
关键词:模拟信号;数字信号;A/D转换;红外发送;红外接收;数字信号显示
Abstract
This paper introduces a new data transmission system: the infrared data transmission system that the analog is converted to the digital. The system is mainly composed of three modules: the processing and conditioning analog signals module, the A / D converter module, the infrared transmission and signals display module. The design of this system is based on the LM324 op amp IC, ADC0809 converter, 8051 single-chip, 555 timer trigger, TSOP1738 infrared receiver ,digital display tubes (DPY) and other components. The working procedures are as follows: Firstly, the weak external analog signals can be converted, processed and conditioned to remove noise by certain circuits. Secondly, analog signals will be converted into digital signals and transmitted to the microcontroller by the A / D converter. Thirdly, the MCU will receive the digital signals that will be demodulated by the infrared emission circuit, and the infrared transmitter emits infrared light while the infrared receiver on the other side will receive the infrared light and demodulate it into digital signals. Finally, the digital signals will be transmitted to the microcontroller and the LED digital display signals.
The system can transmit the analog signals around us to the computer. We can detect and control signals that we are concerned about though computer, and also observe the varying trends of the signals measured on the screen. This system
文档评论(0)