基于PLC变频器控制的两翼自动旋转门设计.docVIP

PAGE 1 毕业论文（设计） 基于PLC变频器控制的两翼自动旋转门设计 摘 要 在现代化工业生产和经济生活中，随着电力电子技术、计算机技术和现代控制理论的发展，变频技术已广泛应用于各个领域，并且日新月异。变频调速由于其调速范围广、调速平滑、运行可靠、节能效果显著、易于实现自动控制等优点，已成为交流电机调速的新潮流。本文介绍了—种基于基于PLC变频器控制的两翼自动旋转门设计。用触摸屏实现人机界面运转模式的选择,用PLC实现多任务的切换控制，用变频器实现调速控制，达到控制要求及节能目的。采用变频调速控制系统取代传统控制系统后的节能效果显著。在我国电力供需紧张的情况下，推广应用变频调速技术，对缓和供电紧张局面，促进国民经济的发展具有重要的意义。 关键词：PLC；变频器；触摸屏 ABSTRACT In the modernization of industrial production and economic life, with the power electronics technology, computer technology and the development of modern control theory, frequency conversion technology has been widely used in various fields, and with each passing day. Frequency because of its speed range, speed smooth, reliable operation, the effect of significant energy-saving, easy-to-achieve automatic control, etc., has become a new trend of AC motor speed control. This paper introduces - PLC based on inverter-based control design wings automatic revolving door. Touch Panel with implementation of human-machine interface operation mode selection, and achieve multi-tasking PLC switch control, speed control with frequency converter implementation to achieve the purpose of control and energy saving. Frequency control system used to replace conventional energy-saving control system after the results are obvious. Chinas tight power supply and demand, promote the use of Frequency Control Technology, the electricity supply to ease tensions and promote national economic development is of great significance. Key words: PLC; inverters; touch panel 目 录 TOC \* MERGEFORMAT 1.引 言 PAGEREF _Toc226862927 \h 1 2.两翼自动旋门的概述及功能 PAGEREF _Toc226862928 \h 1 3.旋转门的硬件选择 PAGEREF _Toc226862929 \h 1 3.1　PLC的选择及扩展 PAGEREF _Toc226862930 \h 1 3.2　PLC的I/O分配 PAGEREF _Toc226862931 \h 1 3.3 变频器工作原理 PAGEREF _Toc226862932 \h 3 3.4　触摸屏GT01的功能概要 PAGEREF _Toc226862933 \h 3 4. 控制程序设计 PAGEREF _Toc226862934 \h 4 4.1 触摸屏设计及操作说明 PAGEREF _Toc226862935 \h 4 4.2