esp8266 物联网技术研究.docxVIP

封面 第PAGE \* MERGEFORMATIII 第PAGE \* MERGEFORMATIII页 共Ⅲ页 摘 要 21世纪，随着网络和无线电技术的发展，数据传输系统的通信方式慢慢从有线转为无线，最具代表性的就是台式电脑慢慢被无线终端手机给替代，手机可以随时随地连接网络，不用受网线的束缚。无线通信发展到现在已经衍生出很多种形式，近距离的有蓝牙和WIFI，远距离的有移动通信技术，如2G，3G，4G等，超远距离的还有卫星通信。无线传输数据在很多方面都有优势，如何利用好无线技术传输数据是当今热门的课题。 本文阐述了一种基于新唐M0516单片机的WIFI数据传输系统的设计。本系统由单片机端和手机端组成。单片机端以M0516单片机为核心，通过检测按键，控制ESP8266模块将按键信息发送给手机端，模拟远程呼叫的情况，此外单片机也能通过ESP8266模块接收手机端发来的消息，继而控制LED灯，模拟远程控制的情况。手机端是通过WIFI功能连接ESP8266，然后在APP中与单片机通信，手机端可以通过发送控制指令，控制单片机端的LED，也能收到单片机发来的按键信息。 本设计能够实现远程呼叫和远程控制功能，最远通信距离为100米，操作简单，通信稳定，可以满足生活中大部分的应用场合，有一定的应用前景。 关键词： 远程通信；M0516单片机；WIFI Abstract In the 21st century, with the development of the Internet and wireless technology, the data transmission system slowly from wired to wireless communication mode, the most representative is the desktop computer slowly replaced by wireless mobile terminal to mobile phone can connect to the Internet anywhere, anytime, without the bondage of cables. The development of wireless communication has been derived a lot of kinds of forms, close with bluetooth and WIFI, distance of mobile communication technology, such as 2 g, 3 g, 4 g, etc., of the kop and satellite communications. Wireless data transmission has advantages in many aspects. How to use wireless technology to transmit data is a hot topic nowadays. This paper describes the design of a WIFI data transmission system based on the new tang M0516 MCU. This system is composed of single chip computer end and mobile phone end. SCM client M0516 single-chip microcomputer as the core, through the test buttons, control ESP8266 module will be key information sent to the mobile terminal, the simulation of the remote call, by using ESP8266 module and MCU can receive cell phone message from the client, then control LED lights, simulate the situation of the remote control. Mobile terminal is ESP8266 via wi-fi connection, and then communicate with MCU in the APP, mobile terminal can send control instructions, control of single chip microcomputer, the L