绝缘子污秽在线监测装置供电系统的分析与设计.pdfVIP

the impedance matching, so that the solar cell output maximum power for energy storage devices. I make the simulation experiment for simulation data and the simulation waveform under the environment of Simulink. In order to solve the power supply problem of insulator contamination on-line monitoring device, I suggest a switch power of the solar cell can taking and super capacitor energy storaging, and put forward a kind of maximum po wer point tracking (MPPT) control system based on ARM7 - LPC2138, it is the combination of capacitor converter switch and Boost converter, super capacitor is charged in the most power; Discharging circuit is the Buck converter. Through the simulation analysis and example verification, this topology structure effectively solves the deficiency of the Boost converter charging, to better achieve the maximum power point tracking control (MPPT),and shorten the super capacitor charging time. The theoretical analysis is correct, the performance of the system reached the design target. Key words: Super capacitor; Voltage converter; The maximum power point tracking; Charging technology Thesis : Application Research 目录 目 录 1 绪论 1 1.1 选题背景及研究意义 1 1.1.1 选题背景 1 1.1.2 选题的意义 1 1.2 国内外研究现状及趋势2 1.2.1 此研究课题国外的发展状况2 1.2.2 此研究课题国内的发展状况3 1.2.3 此研究课题的发展趋势4 1.3 本文研究内容5 2 系统组成及原理6 2.1 本系统框图6 2.2 太阳能电池特性6 2.2.1 太阳能电池工作原理6 2.2.2 太阳能电池等效电路7 2.2.3 太阳能电池输出特性曲线8 2.3 超级电容器9 2.3.1 超级电容的工作原理 10 2.3.2 超级电容器的电路模型 10 2.3.3 储能电容容量设计 11 2.4 DC-DC 变换器的设计 12 2.4.1 Boost DC-DC 变换器的工作模式及基本关系式 12 2.4.2 Boost DC-DC 变换器的临界条件与临界电感 14 2.5