机械加工刀具几何形状毕业论文中英文资料对照外文翻译文献综述.docVIP

PAGE 17 中英文资料对照外文翻译文献综述 附录1： 英文原文 Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling Abstract Influence of tool geometry on the quality of surface produced is well known and hence any attempt to assess the performance of end milling should include the tool geometry. In the present work, experimental studies have been conducted to see the effect of tool geometry (radial rake angle and nose radius) and cutting conditions (cutting speed and feed rate) on the machining performance during end milling of medium carbon steel. The fi