颈动脉产品介绍-支架-inservice 课件.ppt

不可回收标记点 Carotid WALLSTENT? Endoprosthesis Delivery System Final Assembly. Image property of Boston Scientific Corporation. Not necessarily to scale. *Please note that reconstrainment and repositioning are subject to specific limitations. Please refer to DFU cautions and warnings for additional information. 独特的可回收能力* 显示支架回缩的“不可回收点” 只要外鞘的回撤未超过不可回收标记点，医生都可以对支架进行回收重新释放（不超过2次，未接触斑块） 闭环设计 跟踪性极佳的SDS-支架输送系统 卓越的显影性 独特的可回收能力* 唯一经FDA批准可用于双侧治疗颈动脉支架** 临床数据支持 *Please note that reconstrainment and repositioning are subject to specific limitations. Please refer to DFU cautions and warnings for additional information. **The Carotid WALLSTENT Endoprosthesis is indicated for use in eligible patients with ipsilateral or bilateral carotid artery disease Carotid WALLSTENTTM 颈动脉支架 闭环设计 跟踪性极佳的SDS-支架输送系统 卓越的显影性 独特的可回收能力* 唯一经FDA批准可用于双侧治疗颈动脉支架** 临床数据支持 *Please note that reconstrainment and repositioning are subject to specific limitations. Please refer to DFU cautions and warnings for additional information. **The Carotid WALLSTENT Endoprosthesis is indicated for use in eligible patients with ipsilateral or bilateral carotid artery disease Carotid WALLSTENTTM 颈动脉支架 * 尺寸的正确选择 Carotid WALLSTENTTM 颈动脉支架 Carotid WALLSTENT? Monorail? 支架 输送导管 兼容性 最小内径 充分 展开 直径 (mm) 充分 展开 长度 (mm) 植入 直径 (mm) 植入 长度 (mm) 植入 直径 (mm) 植入 长度 (mm) 外径 (F/mm) 工作 长度 (cm) 血管鞘 (F/in) 导引 导管 (F/in) 6 22 5 30 4 36 5.0/1.67 135 5/.073 7/.073 8 21 7 30 6 36 5.0/1.67 135 5/.073 7/.073 8 29 7 40 6 48 5.0/1.67 135 5/.073 7/.073 8 36 7 50 6 62 5.0/1.67 135 5/.073 7/.073 10 24 9 30 8 36 5.9/1.97 135 6/.086 8/.086 10 31 9 40 8 49 5.9/1.97 135 6/.086 8/.086 10 37 9 50 8 59 5.9/1.97 135 6/.086 8/.086 Carotid Wallstent的尺寸选择 选择Wallstent 根据: 靶血管的最大直径 支架植入部位的长度 Wallstent的完全释放直径要比靶血管的最大直径 至少大1 mm 支架覆盖病变两侧的正常组织，至少各长5 mm 尺寸选择原则 Carotid Wallstent尺寸选择 * 支架直径 = 血管直径 (a) + 1 or 2 mm 支架长度 (b) = 病变长度 (c) + 10 mm (两侧各超出5mm) a b c SCH-64701 6 mm 22 mm 5 mm 30 mm 4 mm 36 mm SCH-64707 8 mm 21 mm 7 mm 30 mm 6 mm 36 mm SCH-64708 8 mm 29 mm 7