年产吨的替米沙坦原料药车间工艺设计工作方案.docVIP

武汉工程大学毕业设计 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT VI 摘要 本设计为年产15吨的替M沙坦车间工艺设计。在本设计中，我采用4-甲基-2-正丙基-1H-苯并咪唑-6-甲酸和N-甲基邻苯二胺为原料经过环缩合反应后，与4’-溴甲基联苯-2-甲酸甲酯发生取代反应，最后经过水解反应生成替M沙坦粗品的过程。该设计的主要步骤为环缩合、取代反应、和水解反应，产率依次为71.2％、82％和86％。根据任务书要求，设定301天为基准，替M沙坦的年产量为15吨。 在本设计中，我们先是通过查阅文献资料对替M沙坦和及其原辅料中间产品各种物性参数进行了查询和记录，然后，了解了它的临床用途、不良反应和各种药理毒理反应。然后根据设计绘制了工艺流程框图。其次，我们以反应釜为单位进行了物料衡算，并且列出了反应釜的进出物料平衡表。在以上基础上，完成物料衡算和设备选型，并绘制了带控制点的工艺流程图[1]。然后根据《药品生产管理规范》等，并依据设计实际情况，进行了详细的劳动人员安排。最后根据生产中的废弃物的性质和排出量，制定了合理利用和“三废处理”办法。 【关键词】年产15吨的替M沙坦；物料衡算；热量衡算 Abstract The design of 15 tons of telmisartan workshop process design.In this design, I use is 4 - methyl - 2 - propyl benzene and 1 h - imidazole - 6 - formic acid and N - methyl o-phenylendiamine as raw material after ring condensation reaction, and - bromine biphenyl, 4 - 2 - methyl formate substitution reaction, finally after hydrolysis reaction of alcohol telmisartan process.The main steps of the design for the cyclic condensation, substitution reaction, hydrolysis reaction, and the yield was 71.2%, 82% and 86% in turn.According to the specification requirements, set for 301 days as a benchmark, telmisartan output of 15 tons. In this design, we first through the literature data of telmisartan and its raw materials of various physical parameters in the query of the intermediate products and the records, then, to understand its clinical use, adverse reactions, and all kinds of pharmacology and toxicology.Then according to the design drawing the process flow diagram.Second, we in the reaction kettle has carried on the material balance, and lists the reaction kettle in and out of the material balance.On the basis of above, complete the material balance and equipment type selection, and draw a process flow chart with control points.Then according to the code for the pharmaceutical production management, etc., and according to the design of the actual situation, has carried on the detailed labor personnel arrangement.Finally, according to the nature o