锚栓式刚接柱脚双向受弯性能研究-土木工程专业毕业论文.docxVIP

万方数据 万方数据 Abstract In steel building,the column base connection is one of the key parts that affects the main structure function.The design of column base connection only consider monotonic bending moment,but with spatial analysis methods were developed and applied,it is necessary to consider the column base connection under the biaxial bending.but the theoretical analysis and experimental study are less in the domestic and overseas,also there is no a ystematic analysis method to to design a column base connection under biaxial bending in the current specification. The research of the mechanical properties has important theoretical and practical significance when the column base connection under biaxial bending. Studying on the anchor bolt-type column base connection under the biaxial bending moment of the mechanical properties.At first,analyze the theory of the force - deformation curve, In numerical simulations,check the finite element model by a four anchor bolt exposed cast steel column base connection.This study is aimed at a column base connection under two loading mode, strong axis bending and biaxial bending especially mechanical performance analysis.Studying the stress distribution and deformation pattern of the base plate and the anchor bolt.Researching the influence factors of column base connection: Anchor bolt diameter and position, plate thickness, stiffener thickness etc. Including simulate the flexural capacity and stiffness of the column base connection under the biaxial bending. Analysis the stress distribution of the base plate and the stress state of anchor bolt .The flexural bearing capacity and elastic stiffness in a certain range with the change of parameters. In this article,The stress distribution of the base plate is not uniform and the damage is plastic failure.The stress of the whole anchor bolt is increased rapidly and gradually into the strength of the bending moment, and the stress of the anchor bolt is decreased with the increase of