基于单片机的多路足底压力测量系统学士毕业论文.doc

基于单片机的多路足底压力测量系统毕业论文 毕业设计说明书（论文）中文摘要 随着经济的发展，人们越来越关注于自身的健康，如今已不再是仅仅关注肾脾脏等，足底与运动也渐渐引起了人们的关注。现几年足底压力技术已经深入到多个领域，生物力学，体育培训，医学治疗等，所以足底压力测量系统的研究对我们有着非常重要的意义。为了进一步的了解足部与人体运动功能的联系性，以MSP430单片机和LABVIEW为开发平台，设计了足底压力测量系统。单片机软件实现 A/D 数据转换、I/O口控制多路模拟开关以及与上位机建立全双工串口通讯，同时本文中将给予相应的程序流程图和部分关键代码。LabVIEW界面则主要利用串口向单片机读、写数据，以及多样形式实时显示数据，保存数据，数据回放，数据处理分析等。最后收取实验结果与科学结论作对比来验证系统的可靠性。 关键词 单片机，足底压力，LABVIEW 毕业设计说明书（论文）外文摘要 Title Multiple Plantar Pressure Measurement System Based on MCU ——Software Design Abstract With the development of economy, people more and more attention to their health, and now is no longer just focus on the kidney and spleen, foot and movement gradually attracted the attention of the people. Plantar pressure technology has gone deep into many fields several years ago, biomechanics, sports training, medical treatment, so the research on plantar pressure measurement system is very important to us. In order to further understand the Connection of the foot and body movement function, based on MSP430 micro controller and LABVIEW as the development platform, designs the plantar pressure measurement system. SCM software implementation of A/D data conversion, analog switch control I/O port and a full duplex serial communication with the host computer, at the same time, this paper will give the corresponding flow chart of the program and some key code. The LabVIEW interface is the main chip serial port to use to read, write data, and various forms of real-time data display, data storage, data playback, data processing and analysis. Finally, experimental results and scientific conclusion charge compared to verify the reliability of the system. Keywords plantar ,pressure , labview 淮阴工学院毕业设计说明书（论文） 第 = 1 \* ROMAN \* MERGEFORMAT I 页 共 = 1 \* ROMAN \* MERGEFORMAT I 页 目 录 1 绪论(1) 1.1 课题研究的意义 (1) 1.2 国内外发展现状 (1) 1.3 目前的研究方法 (2) 1.4 本文的主要研究内容(2) 2 系统总体设计(3) 2.1 MSP430(4) 2.2