生活垃圾资源化处理系统设计_DN1500滚筒筛毕业设计计算说明书.doc

PAGE 1 PAGE 2 常 州 大 学 毕业设计（论文） 题 目 生活垃圾资源化处理系统设计 ——DN1500滚筒筛 PAGE PAGE III PAGE PAGE I 生活垃圾资源化处理系统设计——DN1500滚筒筛 摘 要：本计算说明书是关于生活垃圾资源化处理系统设计中的滚筒筛设计，主要根据任务所要求的处理量，来计算出滚筒筛的结构尺寸，并且对滚筒筛进行必要的强度校核，最终目的是为了能够制造出投入实际的生活应用的滚筒筛设备，主要设计工作如下： 确定设计方案：计算设计参数、确定滚筒筛级数； 工艺计算：计算滚筒转速，确定滚筒筛倾斜角，电机功率等； 结构设计：根据给定的垃圾处理量，计算出滚筒筛的长度以及直径；通过对城市生活垃圾的特性研究，确定适宜的滚筒筛孔直径； 附件设计：破袋机设计，滚筒架设计，齿轮装置设计，滚轮装置设计； 滚筒筛的制造安装、检验维修以及日常操作的注意事项； 成本估算； 设计结果表明：此滚筒筛的设计，可以应用于城市生活垃圾的初步分选中，解决了垃圾在分选中存在的问题，而且滚筒筛的工作效率也能达到所需的经济利益要求。 关键词：垃圾特性研究；滚筒筛；破袋机设计；滚筒筛级数  life garbage recycling treatment system design -- DN1500 drum sieve Abstract: The calculation specification is about the drum sieve design of life garbage recycling treatment system design.According to the handing capacity that tasks required,to calculate the structure size of drum sieve and do strength check of the drum screen.The ultimate goal is to produce the drum sieve equipment that can be applied into the actual life. The main works of this design are as follows: (1) The design is determined. Design parameters, drum sieve series are included. (2) The process is calculated. Determining drum speed, bank angle of the drum sieve and the power of motor are designed. (3) The structural is designed. The length and diameter of drum sieves are calculated according to the given the handing capacity of garbage.The appropriate diameter of drum sieves are determined through the study of characteristics of city life garbage. (4) Accessories are designed. The design of the bag breaking machine,the roller frame,the gearing and the roller device are included. (5) The manufacture and installation of the drum sieve , inspection and repair and daily operation notices. (6) The cost is evaluated. The design results show that the design of the drum sieve can be applied to primary select of city life garbage.It solves the problems in the separation of garbage , and the efficiency of drum sieve can reac