变电站电气部分初步设计_毕业设计.doc

变电站电气部分初步设计 目录 TOC \o 1-3 \h \u spacing layer, Point-controlled layer. 2.1 The process of layer Process layer and the second device is a combination of surface equipment, or process layer is the intelligent part of intelligent electrical equipment. The primary function of the process layer are classified into three types: (1) of the electrical power to run real-time traffic detection; (2) to run the state parameters detection equipment; (3) and drive the implementation of operational control. 2.2 Spacing layer Layer spacing of the main functions of the equipment: (1) Summary of the process layer of the interval of real-time data information; (2) implementation of a protection control equipment; (3) the implementation of this operation closed interval function; (4) the implementation of operations and other control over the same period function; (5) data collection, statistical computing and control commands sent with the priority level of the control; (6) connecting the communication function, that is, at the same time to complete the process of high-speed station control layer and network layer functions. When necessary, the upper and lower network interface with dual-port full-duplex mode in order to improve the redundancy of information channels to ensure the reliability of network communication. 2.3 Station Control Layer Station Control layers main task is: (1) Summary of two high-speed network-wide real-time data points, and constantly refresh the database in real time, on time and sign in the history database; (2) of the Statute in accordance with the established data and information sent to the dispatch or control center; (3) The scheduling or control center to receive control commands and turn on the layer spacing, layer implementation process; (4) with the full line of programmable latch-up control station operation; (5) have (or have) the local monitoring station , man-machine contact features such as display, operation, printing, alarm, or even im