南阳市税务局办公楼设计_土木工程专业毕业设计.doc

南阳市税务局办公楼 MACROBUTTON MTEditEquationSection2 SEQ MTEqn \r \h \* MERGEFORMAT SEQ MTSec \r 1 \h \* MERGEFORMAT SEQ MTChap \r 1 \h \* MERGEFORMAT 南 阳 理 工 学 院 本科生毕业设计 南阳市税务局办公楼设计 The design of taxation office building of Nanyang 南阳市税务局办公楼 ［摘　要］本工程为南阳市税务局办公楼，采用现浇钢筋混凝土框架结构。总高度为22.35米，建筑面积为4558.3m2,抗震设防烈度为7度，框架抗震等级为三级，场地类别为二类，基础采用独立基础。结构设计是本次设计的重点。设计主要内容有：确定计算简图、荷载计算、横向框架侧移刚度计算、水平荷载（水平地震作用和风荷载）作用下框架结构的内力和侧移计算、竖向荷载作用下横向框架的内力计算、框架内力组合、截面设计、配筋计算。同时利用PKPM软件进行电算，同手算结果进行对比、分析。 ［关键词］办公楼；框架结构；内力计算；内力组合；构件设计 The design of taxation office building of Nanyang Civil Engineering Major **** Abstract: The name of this project is the taxation office builing of nanyang. The office building is a reinforced concrete frame structure. Its height is 22.35 meters, The area of the building is 4558.3m2.The fortification intensity is 7 degrees, and whose seismic level is three, the venue is the second-class district, and the form of the basis is the single foundation. The focus of this design is the structural design. The main content of the design Include: the identification of its calculation diagram, load calculation, the lateral stiffness calculation of horizontal framework.the internal force and lateral displacement calculation of the frame structure under the action of the lateral horizontal load (horizontal seismic and wind load), the internal force calculation of the horizontal framework under the action of Vertical load, internal force combinations of framework.sectional design, the reinforcement calculation. What’t more, I made use of the computer program named “PKPM” to auditing and analysis my result which was calculated by hand in the process of the Structure design. Keyword: Office Building; Frame structure;Calculation of internal forces ; 目 录 TOC \o 1-3 \h \z \u 1 建筑设计 h 1 1.1 设计基本资料 h 1 1.1.1 工程概况 h 1 1.1.2 原始数据与资料 h 1 1.2 建筑设计说明 h 2 1.2.1 设计概要 h 2 1.2.2 建筑立面剖面设计 h 3 1.2.3 装饰 h 3 1.2.4 抗震设计 h 3