YB T 5092-1996焊接用不锈钢.docVIP

PAGE — PAGE 2 — 本英文版为内部资料，仅供参考，以中文版为准。 本英文版为内部资料，仅供参考，以中文版为准。The Chinese version of standards has precedence to their English translations which are only for internal reference. A Industry Standard of Metallurgy of Ferrous Metals of the People’s Republic of China 中华人民共和国黑色冶金行业标准 YB/T 5092 – 1996 焊 接 用 不 锈 钢 A substitute for YB/T5092- 93 Stainless steel wires for welding 1 Subject content and application scope The content such as type classification, brand, dimension, appearance, technical requirement, test method, rules of acceptance inspection, package, label and quality certificate for the stainless steel wires for welding are stipulated in this standard. The standard is applicable for the stainless steel wires applied in arc welding, gas welding, automatic submerged-arc welding, electroslag welding and gas-shielded welding. 2 Cited of standards GB 222 Sampling method of samples for chemical analysis of steel and permissible deviations of chemical compositions of the finished product GB 232 Method of chemical analysis for steel and alloy GB 228 Test method for metal elongation GB 342 The size, appearance, weight and permissible deviation of hard drawn round steel wire GB 2103 General regulations for the acceptance inspection, package, label and quality certificate of the steel wire 3 Type classification and brand Steel wires shall be classified into 3 types according to their organization situations. Their type and brand are listed in Table 1. 4 Dimension and appearance 4.1 Diameter of the steel wire shall conform to stipulations in Table 1 of GB342. 4.2 Permissible deviation of diameter of the steel wire shall conform to stipulations of Grade 12 as regulated in Table 2 of GB 342. According to the requirement of the buyer, the delivery may be organized per Grade 11. 4.3 The ellipticity of the steel wire shall not exceed half of the tolerance of its diameter. 4.4 Each reel of steel wire shall be tidily arranged