机械产品再制造装配过程动态工序质量控制系统.docVIP

DOI:10.131960.cims.2014.04」iumingzhou.0817.8机械产品再制造装配过程动态工序质量 控制系统 刘明周王强赵志彪凌琳 合肥工业大学机械与汽车工程学院 导；I”关注 分亨 收藏打印 针对机械产品再制造装配过程质量控制问题，在分析机械产品再制造装配过程 特点的基础上，提出面向机械产品再制造装配过程的动态工序质量控制模式。依 据该模式，给出了面向机械产品再制造装配过程的动态工序质量控制系统的功 能结构模型，分析了基于无线射频识别技术的再制造装配过程质量信息感知平 台、再制造装配过程动态工序质量在线优化专家系统、基于组件技术可视化在线 工序指导模式等关键使能技术。以某发动机再制造企业的重载发动机装配过程为 例，应用J2EE构架开发了面向发动机再制造装配过程的动态工序质量系统，验 证了该动态工序质量控制模式的可行性和有效性。 关键词 再制造;装配过程；动态质量控制;射频识别；可视化;机械产品; 刘明周（1968-），男，安徽六安人，教授，博士生导师，研究方向: 制造过程监测与控制、制造系统建模与仿真、物流调度 :liuming-zhou0551@163. com; 王强（1987-）,男，安徽合肥人，博士研究生，研究方向制造过程 监测与控制，通信; :wq_hfutie@163. com; 赵志彪（1986-），男，山西大同人，博士研究生，研究方向:装配过 程质量控制;:zzbhfut@163. com; 凌琳（1987-），女，安徽合肥人，博士研究生，研究方向生产物流 规划。 2013-01-10 基金国家973计划资助项目(2011CB013406) Dynamic assembly process quality control system for mechanical products remanufacturing LIU Ming-zhou WANG Qiang ZHAO Zhi-biao LING Lin School of Mechanical and Automotive Engineering, Hefei University of Technology; Abstract Aiming at the quality control problem of remanufacturing assembly process, a dynamic process quality control mode oriented to mechanical products remanufacturing assembly process was put forward based on the analysis of remanufacturing assembly process. According to this mode, the functional strueturc model of dynamic quality control system was presented. Furthermore, some key enabling technologies were studied in detail, which included quality monitoring based on RFID, expert system for dynamic process quality online optimization and visual onlineprocess int roduc tion mode based on comp orient t echnology- The assembl y process of some rcmanufacturing cnginc enterprisc was taken as the example to develop the prototype system of dynamic process quality control system by applying J2EE architecture, which demonstrated the feasibility and validity of the proposed method. Keyword rcmanufacturing; assembly process; dynamic quality monitoring; radio frequency identification; visualization; mechanical products; Received 2013-01-10 0引言 随着资源的H益枯竭和环境污染的加