多孔介质设置及建模实例.docVIP

我做的多孔介质的简单例子（均为k-e?RNG所做）) 模型 ?仿真结果 多孔介质定义的方法(2008-12-14 20:28:12) 不知道怎的，这些日子都跟多孔介质干上了 1. Define the porous zone. ?2. Define the porous velocity formulation. (optional)?? ?3. Identify the fluid material flowing through the porous medium. ?4. Enable reactions for the porous zone, if appropriate, and select the reaction mechanism. ?5. Set the viscous resistance coefficients and the inertial resistance coefficients? , and define the direction vectors for which they apply. Alternatively, specify the coefficients for the power-law model.?? ?6. Specify the porosity of the porous medium. ?7. Selec