有关钢结构地震作用讨论.PDFVIP

26 1 Vol. 26, No. 1 2006 2 EARTHQUAKE ENG INEERING AND ENG INEER ING VIBRATION Feb. 2006 : 1000-1301( 2006) 01- 00 4- 06 于海丰, 张耀春, 张文元 ( , 1500 0) : 6( TJ11- 74TJ11- 78GBJ11- 8 GB50011- 2001JGJ - 8CECS160: 2004), , , JG J - 8 GB50011- 2001 2 0. 02 0. 035, , 4 , : ; ; ; : P315. 5; TU3 2. 212 : A D iscu ssion on earthquake action on steel structures Yu Haifeng, Zhang Yaochun, ZhangW enyuan ( School of Civil Eng ineering, H arbin Institute of Technology, H arbin 1500 0, China) Abs tract: The calculation m ethods for earthquake action on steel structures, includ ing the loading comb inations and the base shear method are briefly introduced accord ing to six Chinese codes( TJ11- 74T J11- 78GBJ11- 8 GB50011- 2001JGJ - 8CECS160: 2004). Based on the comparison of the results after normalization for the di-f ferent codes, the levels of earthquake action for these codes are evaluated. The analysis show s that, the earthquake action levels are about the same, except that the earthquake action on steel structures for the JGJ - 8 and GB50011- 2001 codes are obviously increased because of tak ing the damping ratios to be 0. 02 or 0. 035. Consider- ing the earthquake action levels do not changemuch bewt een the old and new seism ic design codes for reinforced concrete structures and masonry structures, it is obviously irrational to raise the earthquake action levels of steel structures, wh ich have good seism ic perform ance. K ey w ord s: steel structure; earthquake action; elastic response spectrum; seism ic base shear 6(TJ11-74TJ11-78GBJ11-8 GB50011- 2001JGJ - 8CECS160: 2004) [ 1~ 6] , JGJ - 8 GB50011- 2001 TJ11- 74TJ11- 78 CECS16