ARUBA制造业办公楼和厂区无线网络方案.pptVIP

* * * * * * * * * Aruba’s solution provides the capability to automatically adjust the power output of surrounding APs when another AP becomes inoperable (e.g. unplugged, defective, etc.). * The switch detects the failure of an AP and tells the other APs what settings to use to provide coverage in the area formerly handled by the now dead AP. Note, because of the 3D calibration from Aruba the coverage may come from APs on the floor above or below or from surrounding APs. [During calibration it is also possible that the switch will tell some APs to become “APMs” - access point and air monitor