五轴联动数控加工后置处理与程序编译技术分析.pdfVIP

ABSTRACT The development of Numerical control equipment and technology are the key factor to measure the modernization of one nation’s equipment manufacturing industry. At present, the field is facing the problem of the low numerical control rate 、the low utilization ratio of high-end CNC equipment and failing to get breakthrough in some critical technology, which has greatly restricted the progress of turning to the manufacturing industry powerful nation. On that basis, the thesis have done research on the technology of post processing and NC Program’s compiling in five-axis linkage CNC machining based on the laboratory’s double turntable five axis linkage CNC machine tool of independent R D , got the main achievements as follows: (1) Researched on the post processing algorithm of five-axis machine tools based on the theory of rigid transformation, deduced the coordinate calculation formula of double turntable five axis machine tools. Develop the special post processor by the tools of TCL and UG/post, and verified the result by simulation software of VERICUT and actual cutting on the machining center. (2) After analyzing causes and factors of nonlinear error in five-axis machining, the conclusion that the maximum nonlinear error was near the midpoint between the adjacent Cutter-Location points, researched on the control method of nonlinear error by simplified model and point interpolation, and test its effectiveness by Simulating the tool path of impeller’s runner. (3) Designed the integral structure of Open CNC’s compiling module according to the LexYacc approach in computer compilation theory, and realized the error detection of morphology and grammar of NC program by Object-Oriented technology. Put forward a