三相交流调压器的设计说明书.docVIP

PAGE  . . 目录  TOC \o 1-3 \h \z \u  摘要  2  Summary  2  1.设计意义和要求  3  1.1.设计意义  3  1.2设计要求  3  2.方案设计  4  3.主电路的设计  5  3.1主电路的原理分析  5  3.2主电路器件的选择  7  3.3晶闸管模块  7  4.触发电路的设计  8  5利用MATLAB进行仿真  10  5.1仿真电路图  10  5.2仿真结果  11  5.2.1 A相仿真结果  11  5.2.2 B相仿真结果  14  5.2.3 C相仿真结果  17  5.2.4 ABC三相的仿真结果  20  6仿真结果分析  23  心得体会  24  参考文献  25  附录：主电路图  26  摘要 本次课程设计的题目是三相交流调压电路的设计.主要是设计出主电路和触发电路.通过触发电路触发主电路中的反并联的晶闸管来控制负载电压电流。触发电路产生的触发脉冲的延迟角也是可以调节的.通过对它的调节来达到对输出控制的目的。在MATLAB中连接好总电路图.用示波器观察输出结果.直观方便。MATLAB这一功能强大的软件给我们带来了很多方便.让我们对于设计电路的结果分析 更加清晰明确。本次课程设计我们学到了很多知识.知道了单相交流调压电路的组成已经触发电路的结构.知道了调压的基本原理.这对我们课堂所学的知识是个巩固和加强.让我们把课堂所学的知识真实的用到实践中.亲自动手.也增强了我们的动手能力.对我们的将来的发展起到了很好的作用。 关键字： 三相交流调压电路 MATLAB 主电路 Summary The subject of this course designed is three-phase AC voltage regulator circuit design, mainly to design the main circuit and trigger circuit, trigger circuit is triggered by the main circuit in the anti-parallel thyristors to control the load voltage and current.Trigger circuit generates the trigger pulse delay angle is adjustable, adjust it to achieve by the output control.In matlab the total circuit connected with the oscilloscope output, easy and intuitive.Matlab This powerful software has brought us a lot of convenience, let us analyze the results for the design of the circuit is more clear.The curriculum we learned a lot, know the composition of single-phase AC voltage regulator circuit has been triggered circuit structure, know the basic principles of the regulator, which is the knowledge we learned in the classroom is to consolidate and strengthen, so wethe knowledge learned in the classroom practice of real use, hands-on, but also enhances our ability, our future has played a good role. Keywords: trigger circuit voltage MATLAB oscilloscope 三相交流调压器的设计 1.设计意义和要求 1.1.设