13.56M读卡器开发详细讲解二（RC522驱动程序).docVIP

. . 13.56M读卡器开发详解二 1.?硬件接口介绍 根据上一篇的介绍.小编使用了RC522的SPI口通信方式和51单片机进行通信。硬件接口设计此处不再附图。只是将接口配置列写如下： sbit??spi_cs=P1^6; sbit??spi_ck=P1^5; sbit??spi_mosi=P1^4; sbit??spi_miso=P1^3; sbit??spi_rst=P1^2; ? #define?SET_SPI_CS??spi_cs=1 #define?CLR_SPI_CS??spi_cs=0 #define?SET_SPI_CK??spi_ck=1 #define?CLR_SPI_CK??spi_ck=0 #define?SET_SPI_MOSI??spi_mosi=1 #define?CLR_SPI_MOSI??spi_mosi=0 #define?STU_SPI_MISO??spi_miso #define?SET_RC522RST??spi_rst=1 #define?CLR_RC522RST??spi_rst=0 ? 2.?51单片机模拟SPI通信函数 ? void?delay_ns(unsigned?int?data?ns) { ??unsigned?int?xdata?i; ??for(i=0;i