温拌沥青的技术评价方法与路用性能分析.pdfVIP

摘 要 温拌沥青由于降黏助剂的作用促使施工过程中拌和和碾压温度大幅降低，在国家大 力提倡节能减排、可持续发展战略思想背景下，温拌沥青的研究及应用更加深入。目前 温拌技术的研究多侧重于温拌沥青的研发以及温拌沥青混合料路用性能评价，但缺乏一 项综合评价温拌沥青温拌性能的方法。 本文首次提出综合评价温拌沥青技术性能的方法——黏温曲线法、变温击实法和拌 # 和功率法。试验测试了五种沥青 （三种ACMP 温拌沥青、70 基质沥青以及SBS 改性沥 青）在不同温度时的布氏黏度，以及在不同初始击实温度下进行了五种沥青混合料的马 # 歇尔击实试验。以70 和SBS 沥青混合料为参照，研究分析三种温拌沥青混合料的高温 性能和水稳定性。提出沥青混合料养生条件的概念，采用不同养生温度和养生时间进行 马歇尔稳定度和动稳定度试验。 研究结果表明：沥青的温拌特性可以采用温差以及回归参数指标来评价。ACMP 温 拌沥青混合料的高温性能良好，而其水稳定性较差。沥青混合料的稳定度和动稳定度随 着养生龄期增大，而养生温度主要改变强度形成的速率。 关键词:道路工程，温拌沥青，评价方法，黏温曲线法，变温击实法，拌和功率法， 路用性能 ii Abstract WMA technology promote the actual construction temperature’s decline in the process of mixing and compaction due to its viscosity reduction effect research of WMA will play an important role in the next few years of exploring the road engineering under the background of our country advocating strongly the strategic thought of energy conservation and emissions reduction and sustainable development. Currently researchers focuses more on the basic theory and evaluation of road performance of WMA and its mixture but lack of system comparisons and evaluation methods about the material performance, this article put forward a comprehensive evaluation method of WMA. This is the first integrated presentation of WMA technology evaluation methodsviscosity-temperature curve, vary temperature-compaction method and mixing power method. The research of road performance mainly includes of five kinds of asphalt mixture’s high temperature performance and water stability. Putting forward the concept of WMA curing condition, and analyzed the influence of the curing temperature and curing tim