汽车英语3—汽车基本构造篇 教参Unit 10 教师用书.docVIP

Unit 10 auto service manual Ⅱ Overview Section Class work---Course Book Section I Reading Comprehension (Skimming and Scanning) Reading A Ss skimming and scanning the passage and choose the best answer. Ss read the passage again and translate the sentences. Reading B Ss read the read the passage and fill in the blanks with proper words. Then answer the questions. Section II Grammar Grammar revision I Exercise to review the grammar Section III Comprehensive Practice (I) Applied writing Questionnaire (II) Presentation Ss choose one of the two tasks, discuss with their partners and give a presentation. For a fast route through the unit, focus mainly on reading and speaking skills. SectionⅠ Reading Ss read three passages in this part. Reading A: Seat Belts; Reading B: How to Use the Keys of an Auto. Reading A: Task 1: Tell Ss to skim and scan the passage and do task 1. Let Ss give their answer and find the detailed information in the test. Answer: 1. C 2. B 3. D 4. D 5. A Task 2: Ss read the passage again. Ss translate the sentences and then check the answer. Answer: 1. 开车或乘车前请系好安全带，如果驾驶员没有系好安全带，汽车将会发出滴滴声。 2. 安全带是在发生事故时为乘客提供安全保护的，所以请一定正确系好安全带。 3. 离开汽车前请检查您解开安全带后是否将其完全缩回牵引器中。 Reading B Task 1: Ask Ss how to use a key in their daily life. Ss read the passage and try to fill in the blanks with the words given. Then check the answer. Script: Two keys are provided with your car; a master key and a service key. The master key, the remote control, and the central locking button may all be used to lock and unlock all of your cars locks. The service key will operate only the drivers door and the ignition switch. It is intended to help deter unwanted entry into the glove compartment and trunk. Turn the key once to unlock the drivers door only. Turn the key again (within 10 seconds) to unlock all doors and the trunk. One turn with the key towards lock in the drivers door locks all doors, trunk. Use the switch on the front door armrests to lock/unlock the car from the inside. WARN