SGT-800燃气轮机持续可用性和维修性改进.pdfVIP

SGT-800 GAS TURBINE CONTINUED AVAILABILITY AND MAINTAINABILITY IMPROVEMENTS Dr. Vladimir Navrotsky Lena Strömberg Claes Uebel Siemens Industrial Turbomachinery AB Finspong, Sweden POWER-GEN Asia 2009 – Bangkok, Thailand, October 7-9 Copyright © Siemens AG 2009. All rights reserved. 1 Copyright © Siemens AG 2009. All rights reserved. Summary Continued enhancement of existing OEM (Original Equipment Manufacturer) products and services is an important part of the OEM’s development efforts. In order to offer, to both future and existing users, gas turbines with high grading for efficiency, reliability, availability and maintainability at low life-cycle cost, Siemens Energy invests significantly and with continuity in the development of its products and services. Recently, some of the results of these extensive research and development (RD) programs have been implemented in the SGT-800 gas turbine and its maintenance. This has resulted not only in a power output/efficiency increase from 45 MW/37% to 47 MW/37.5%, but also in a simultaneous increase of the turbine’s availability of about 1% [1-2]. The RD programs behind these achievements have addressed not only further development of advanced materials and designs for hot gas path components, but also serviceability and maintainability improvement, including advanced repair, non-destructive inspection technology, remote monitoring and diagnostics, and new maintenance concepts with extended maintenance intervals [3]. Operational experience accumulated since 2006 on performed upgrades has confirmed the improvement of power out