UE初始附着及随机接入流程介绍.ppt

LTE FDD 知识交流 * * Perform the radio resource configuration procedure Reception of the RRCConnectionSetup by the UE Discard the cell reselection priority information Stop a set of timers enter RRC_CONNECTED Set the content of RRCConnectionSetupComplete message Stop the cell re-selection procedure LTE FDD 知识交流 * * LTE FDD 知识交流 * * eNodeB Signalling Tracing System LTE FDD 知识交流 * * SRB SRB0 SRB1 SRB2 SRB0 is for RRC messages using the CCCH logical channel . SRB2 is for NAS messages, using DCCH logical channel. SRB2 has a lower-priority than SRB1 and is always configured by E-UTRAN after security activation. SRB1 is for RRC messages (which may include a piggybacked NAS message) as well as for NAS messages prior to the establishment of SRB2, all using DCCH logical channel . LTE FDD 知识交流 * * The ciphering algorithm is common for all radio bearers (i.e. SRB1, SRB2 and DRBs) The integrity protection algorithm is common for signalling radio bearers SRB1 and SRB2 Neither integrity protection nor ciphering applies for SRB0 DRB 头压缩 加密 SRB 完整性保护 加密 integrity protection and ciphering RRC PDCP LTE FDD 知识交流 * * Keys for the integrity protection of RRC signalling for the ciphering of RRC signalling for the ciphering of user data The four AS keys change upon every handover and connection re-establishment LTE FDD 知识交流 * * RRC connection reconfiguration to establish/ modify/ release RBs, to perform handover, to setup/ modify/ release measurements. including the mobilityControlInfo not including the mobilityControlInfo Purpose: to modify an RRC connection LTE FDD 知识交流 * * Contents UE小区搜索过程 RRC初始附着流程 随机接入特殊场景 eNodeB整体结构及LTE物理信道格式和信道映射 LTE FDD 知识交流 * * 基站 ? 发送消息0即PDCCH Order Msg0承载在PDCCH； 包括Dedicated Preamble和Mask Index； 带HARQ； 触发原因： UE上行失步； 有下行数据要发/怀疑UE异常离开，释放资源。 Msg2中不必重新分配C-Rnti; 手机 发现自己失步，监听接收PDCCH Order; Msg1用专用前导发起 。 Msg3所谓的消息3没有实质意义，有数据发数据，没数据发Padding。 基于专用前导的非竞争随机接入-场合4 UE eNB 1 2 Min delay 2ms Msg2: RA response on PDSCH Msg1: preamble