工艺偏差影响下硬件木马检测功率分析方法-计算机工程与应用.pdf

Computer Engineering and Applications 计算机工程与应用 2018 ，54（24 ） 1 ⦾热点与综述⦾ 用 工艺偏差影响下硬件木马检测功率分析方法 应 杨达明，黄姣英，高 成 与 YANG Daming, HUANG Jiaoying, GAO Cheng 程 g 北京航空航天大学 可靠性与系统工程学院 北京 100191 r 工 o School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China . 机 j a YANG Daming, HUANG Jiaoying, GAO Cheng. Power analysis method of hardware Trojan detection considering e process variation. Computer Engineering and Applications, 2018, 54 （24 ）：1-5. 算 c 计 . Abstract ：Side channel analysis technology is the main detection method of hardware Trojan. Because the side channel w signal is affected by process variations, its application is limited. Aiming at this problem, this paper proposes a FPGA w hardware Trojan detection using power analysis considering process variation. Considering the relationship between w threshold voltage and chip current, the influence of process variations on chip power is analyzed. Hspice is used to simu- late the effect of process variation on CMOS power by changing the main process parameters. Simulation results of Hspice show that the fluctuation range of the power of the FPGA chip is ± 5% under the influence of process variation. Xpower is used to analyze the power of chips with and without hardware Trojan under the influence of process variation. Finally, the proposed method is verified by the actual power measurement results of FPGA. The proposed analysis method can calculate the fluctuation range