绿洲项目预备的设计复查UWAA空间设计
6月6日, 2000, 命令和数据处理, 4-51
控制. 2 RS232港口将是使用为了红外线的和crosslink为了传达在中间DMS和
DSS. 1 的14类似物输出将是使用为了全身盘绕控制. 告密者模型8支持一直到1 meg的
记忆在板子上哪个是充分的记忆缓冲器为了传感器数据那将是送从DMS到DSS为了
播送彻底地.
4.2.2 网能力消费
DSS: 1.5瓦特–这包括估计为了通信管理员.
DMS: 1.7瓦特–这包括估计为了通信管理员.
4.2.3 网计算机系统块
DSS: 0.124公斤–包括通信管理员估计
DMS: 0.114公斤–包括通信管理员估计
4.2.4 红外线的数据链环
两者DMS和DSS将使用一样红外线的收发器.
IBM31T38JS低-能力综合的红外线的收发器
能力消费
2mA @ 2.7 V
3.3mA @ 5.25 V
维: H 4.0毫米X D 4.8毫米X L 9.6毫米
的有能力的传输一直到4Mb/s那数据比率的然而我们将唯一的需要分数.
山脉是~1m
4.2.5 记忆
4.2.5.1 DSS
靴记忆
类型: 闪光–闪光是的类型EPROM (可消除的可设计的只读记忆) 一般使用在基本输入输出系统或
碎片的靴记忆.
容量: 512K –典型的靴程序是周围64K. 512K应该是足够的到句柄无论我们需要和它
来标准有Aengine.
位置: Aengine可选择的16小块闪光公羊查找在microcontroller木板.
程序记忆
类型: SRAM –静态公羊是的类型随机存储器那需要没有能力到维持. 它能是读
从和书写到, 许多的加快比更多的共同的打兰, 然而它是更多的花费的.
容量: 512K
位置: Aengine来标准有512K的SRAM.
数据记忆
类型: 紧凑的闪光(闪光纸牌)
容量: 100MB –Aengine将支持一直到420MB紧凑的闪光的.
OASiS Project Preliminary Design Review UWAA Space Design
June 6, 2000, Command and Data Handling, 4-51
control. The 2 RS232 ports will be used for the infrared and crosslink for communication between the DMS and the
DSS. 1 of the 14 analog outputs will be used for EM coil control. The Tattletale model 8 supports up to 1 meg of
memory onboard which is sufficient memory buffer for the sensor data that will be sent from the DMS to the DSS for
transmission to the ground.
4.2.2 Net Power Consumption
DSS: 1.5 Watts – this include estimates for communications controllers.
DMS: 1.7 Watts – this includes estimates for communications controllers.
4.2.3 Net Computer System Mass
DSS: 0.124 Kg – including communications controller estimates
DMS: 0.114 Kg – including communications controller estimates
4.2.4 Infrared Data Link
Both the DMS and the DSS will use the same infrared transceiver.
IBM31T38JS Low-Power Integrated Infrared Transceiver
Power consumption
2mA @ 2.7 V
3.3mA @ 5.25 V
Dimensions: H 4.0 mm X D 4.8 mm X L 9.6 mm
Capable of transmitting up to 4Mb/s however we will only need a fraction of that data rate.
Range is ~1m
4.2.5 Memory
4.2.5.1 DSS
Boot me
原创力文档

文档评论(0)