SCI英文科技论文常见的错误及修改法.pptVIP

[1] Wear map for a copper-based friction clutch material under oil lubrication [2] The Most Common Habits from more than 200 English Papers written by Graduate Chinese Engineering Students References * * * * * * * * * * * * * * * * * * * Common Mistakes in English Papers Taimin Gong 2014.11.22 How to express your ideas exactly in English Wear maps for copper-based friction materials applied to wet clutch can demonstrate different wear regimes and mechanisms, as well as predict the wear life of materials. In this study, a ring-on-ring braking test system was used to investigate the wear resistance of a copper-based friction material against alloy structural steel under oil lubrication. A wear map constructed from the measured wear rates revealed ultra-mild, mild, and severe wear regimes. The dominant wear mechanisms controlling the wear regimes were also addressed. And the linear equations of the transition boundaries between wear regimes could be obtained from the experimental data. Wear maps for specific material combinations can be used to depict the dominant wear processes and their severity under a specified range of sliding conditions. Wet clutches are one application for which such maps can be used. In the current work, a copper-based friction material was slid against alloy steel in a ring-on-ring braking simulator. A wear map constructed from the measured wear rates was partitioned into ultra-mild, mild, and severe wear regimes. The dominant wear mechanisms that control these wear regimes are also discussed. Based on the data, linear equations were constructed to mark the transition boundaries between wear regimes. 1 a, an, the Mistake: 1) omitted where they are required. 2) used where they are not needed or contribute to wordiness. 3) used wrongly in place of the correct article. ….possess excellent friction and wear characteristics, smooth engagement …and long operating life. ….possess excellent fric