51单片机44键盘按键程序设计.docVIP

/**********************4*4按键程序************* FileName:key.c Author:沧海麒麟 Date:2011.05.04 Version :1.0 Description:按键简单应用,适用于MCS-51 Function:实现4*4键盘的简单编码 */ #includereg52.h #define uint unsigned int #define uchar unsigned char #define key_port P0 uchar num; uchar Key_Scan(); void Delay_Nms(uint N); void main() { while(1) { Key_Scan(); switch(num) { case 0:P1=0xff;break; case 1:P1=0xfe;break; case 2:P1=0xfd;break; case 3:P1=0xfc;break; case 4:P1=0xfb;break; case 5:P1=0xfa;break; case 6:P1=0xf9;break; case 7:P1=0xf8;break; case 8:P1=0xf7;break; case 9:P1=0xf6;break; case 10:P1=0xf5;break; case 11:P1=0xf4;break; case 12:P1=0xf3;break; case 13:P1=0xf2;break; case 14:P1=0xf1;break; case 15:P1=0xf0;break; } } } /*****************N毫秒延时函数*********************************/ void Delay_Nms(uint N) { uint x,y; for(x=N;x0;x--) for(y=110;y0;y--); } /*****************按键扫描函数*********************************/ uchar Key_Scan() { uchar temp; key_port=0xfe; temp=key_port; temp=temp0xf0; while(temp!=0xf0) { Delay_Nms(5); temp=key_port; temp=temp0xf0; while(temp!=0xf0) { temp=key_port; switch(temp) { case 0xee:num=0; break; case 0xde:num=1; break; case 0xbe:num=2; break; case 0x7e:num=3; break; } while(temp!=0xf0) { temp=key_port; temp=temp0xf0; } } } key_port=0xfd; temp=key_port; temp=temp0xf0; while(temp!=0xf0) { Delay_Nms(5); temp=key_port; temp=temp0xf0; while(temp!=0xf0) { temp=key_port; switch(temp) { case 0xed:num=4; break; case 0xdd:num=5; break; case 0xbd:num=6; break; case 0x7d:num=7; break; } while(temp!=0xf0) { temp=key_port; temp=temp0xf0; } } } key_port=0xfb; temp=key_port; temp=temp0xf0; while(temp!=0xf0) { Delay_Nms(5); temp=key_port; temp=temp0xf0; while(temp!=0xf0) { temp=key_port; switch(temp) { case 0xeb:num=8; break; case 0xdb:num=9; break; case 0xbb:num=10; break;