电机壳体消失模工艺过程控制(1).docVIP

福建现场电机壳体工艺过程控制 刘存涛 摘要：该现场之前采用潮模砂工艺生产电机壳，该工艺生产效率低且工人劳动强度大，产品外观质量不好及清理工作量大。随着消失模工艺的推广及广泛应用[1]，该厂引进消失模工艺生产电机壳体，因技术等方便的限制，机制白模表面连续性差，铸出的铸件表面质量不好，并有夹渣、加砂、冷隔、变形等缺陷。受该厂委托，特来此厂进行技术指导和服务，从原材料预发，白模烘干，刷涂及干燥，组型工艺到埋箱造型和浇注方面进行严格控制，解决消失模生产过程出现的质量问题。 关键词：消失模；电机壳；缺陷；工艺 Process Control of Motor Shell Casting on LFC in Fujian Abstract: the production of the motor shell is produced by the tidal sand mold process before the Fujian field, which has low efficiency and large labor intensity, and the product quality is not good and the cleaning work is large. Vanished, along with the promotion and the a