UHMWPE-超高分子聚乙烯参数.pptVIP

YUHWA HIDEN?UHMWPE Grades 优良的耐磨性 优良的摩擦系数 优良的抗裂性能 很好的耐化学腐蚀性 零吸水率 杰出的的耐冲击强度 YUHWA HIDEN? UHMWPE 特点 YUHWA HIDEN? UHMWPE grades are Ultra high molecular weight polyethylene resins developed by KPIC. YUHWA HIDEN? UHMWPE Grades are suitable mainly for compression molding but also for extrusion of sheets, profiles and blocks, and for high modulus filaments and porous products. Profiles Sheets 机械(轴承, 输送机部件) 化学工业(波纹管, 管材) 内衬 (燃料内衬板, 贮仓和料斗) 电气工业(泵组, 绝缘部件) 休闲, 运动 (滑冰场, 保龄球馆) 人造关节和腿 特殊产品 高模量纤维(防弹纤维, 绳索) 多孔制品(吸收剂, 过滤器) 特殊添加剂及涂料 蓄电池隔板 应用 YUHWA HIDEN? UHMWPE UHMWPE 牌号 牌号 分子量(106 g/mol) 特性 加工 及 用途 U050 5 优越的稳定性 压模成型, 挤出 U050 F 纤维制品 U050 X 螺杆挤出 U070 7 优越的耐磨性 压模成型, 挤出成型, 蓄电池隔板 U090 9 卓越的耐磨性 Specialty Grade – KPIC is developing new grades of UHMWPE for diverse applications. Non-additive grade Special additive grade (heat stabilizer, UV stabilizer, Lubricant) YUHWA HIDEN? UHMWPE grades are supplied in powder-formed resin. KPIC’s advanced process and catalyst system provide highly homogeneous product with minimal impurity content. YUHWA HIDEN? UHMWPE grades have good physical properties and processability. YUHWA HIDEN? UHMWPE * Additives for basic grades : anti-oxidant 属性 项目 单位 检测方法 检测样品 牌号 U050 U070 U090 密度 g/cm3 ASTM D1505 片材 0.93 0.93 0.93 分子量 106 g/mol KPIC Method - 5 7 9 体积密度 g/cm3 ISO 60 粉末 0.43 0.43 0.43 平均颗粒尺寸 ?m KPIC Method 粉末 130 130 130 Above data are intended to serve as guides only, and are not sales specification limits. YUHWA HIDEN? UHMWPE 项目 单位 检测方法 检测样品 牌号 U050 U070 U090 屈服应力 MPa ASTM D638 研磨样品 17≤ 17≤ 17≤ 冲击力度(有缺口) KJ/m2 ASTM D256 60 55 50 肖氏硬度D - ASTM D785 片材 6mm 62 62 62 耐磨性 (以U050=100为基础) - KPIC Mehtod 棒材 100 90 80 基本特性 物理特性 1) Wear resistance is analyzed by taber type abrasion test machine, The values are relative based on U050=100, the lower value is the higher resistance. 属性 * Above data are intended to serve as guides only, and are not sales specification limits. YUHWA HIDEN? UHMWPE 项目 单位 检测方法 大韩油化HIDEN UHMWPE 熔点 ℃ A