一种高速贴片机在线贴装优化方法研究-计算机工程与应用.pdf

220 2017 ，53（9 ） Computer Engineering and Applications 计算机工程与应用 ⦾工程与应用⦾ 一种高速贴片机在线贴装优化方法研究 1，2 1 2 2 邢 星 ，贾志淳 ，孙乙铭 ，陈 进 1，2 1 2 2 XING Xing , JIA Zhichun , SUN Yiming , CHEN Jin 1. 渤海大学 信息科学与技术学院，辽宁 锦州 121013 2. 哈尔滨工业大学 航天学院，哈尔滨 150001 1. School of Informational Science and Technology, Bohai University, Jinzhou, Liaoning 121013, China 2. School of Astronautics, Harbin Institute of Technology, Harbin 150001, China XING Xing, JIA Zhichun, SUN Yiming, et al. Online pick and place optimization method for high speed surface mounting devices. Computer Engineering and Applications, 2017, 53 （9 ）：220-225. Abstract ：The component mounting sequence is the key factor in the production efficiency for high speed surface mounting devices. In order to improve the efficiency of high speed surface mounting devices, this paper studies the optimization problem for multi-head high speed surface mounting devices and proposes an online method for optimizing the pick and place sequences. Based on the designed high speed surface mounting device, it examines the performance of the proposed method. The experimental results show that the proposed method can improve the production efficiency for high speed surface mounting devices. Key words ：high speed surface mounting device; online pick and place sequence; optimization method; nozzle allocation 摘 要：贴装顺序是影响高速贴片机生产效率的关键因素，为了提高贴片机生产效率，研究多贴片头高速贴片机贴 装顺序优化问题，通过吸嘴选择与分配和贴装顺序优化，提出一种在线贴装优化方法。实验以自主研发的高速贴片 机为平台，验证优化方法的性能；实验结果表明该方法可以进一步提高高速贴片机的生产效率。 关键词：高速贴片机；在线贴装顺序；优化算法；吸嘴分配 文献标志码：A 中图分类号：TP31 doi ：10.3778/j.issn. 1002-8331.1511-0008 1 引言 进电子制造业的水平，是现代电子制造领域的竞争热 表面贴装技术（Surface Mount Technology ，SMT） 点。然而，我国自1988年研制出第一台低速贴片机的 [1-2] 是第