课件：徕卡全站仪使用方法.ppt

* §4.4 全站仪测量系统应用举例 1、大坝及边坡监测 全站仪测量系统应用举例 自动变形监测系统 — ADMS章 全站仪测量系统的开发与应用 3 自动变形监测系统—ADMS * 3、地铁形变监测 2、大桥变形监测 §4.4 全站仪测量系统应用举例 全站仪测量系统应用举例 自动变形监测系统 — ADMS章 全站仪测量系统的开发与应用 3 自动变形监测系统—ADMS * ELECTRONIC TOTAL STATIONS - AISI 1 The AISI is an electronic theodolite used to measure horizontal and vertical angles and distances. It represents these measurements on a display panel and can concurrently transfer them to a portable data-recording unit (DRU). The DRU can then transfer the data to an external microprocessor for printing, plotting, and further refinement by surveying software. * AISI DESCRIPTION 2.The AISI has two modes—a construction-survey mode with a range of 2 kilometers and a topographic-survey mode with a range of 7 kilometers. The AISI mounts on standard military tripods and consists of the following modular subassemblies: An electronic theodolite (a digital, automatic angle- and distance-reading/recording instrument with an electronic display/control panel). A DRU (an external memory device for storing data from the theodolite). *  3. The AISI interfaces with microprocessors, printers, and plotters. It transfers digital data directly from its DRU (via a cable interface) to the microprocessor. The data is then refined by a fully integrated, 3D, ground-modeling, drafting-design system. The data can also be manually input to any CAD software program. AISI DESCRIPTION * 4. The AISI measures distances from 2 meters to 7 kilometers with a digital readout of 1 millimeter and is accurate to ±2 millimeters + 3 ppm over the measured distance. The horizontal and vertical angles are measured to an accuracy of 1″ of arc. The AISI has an electronic leveling device called a dual-axis compensator and adjusts for horizontal and vertical leveling with errors of 6″ or less. The system has built-in communications with a range of 1 mile, an illuminated reticle for night operations, a 60-kilobyte memory capacity, and an alphanumeric key