六面体网格划分练习教程.pdfVIP

LESSON 10 Preparing Geometry for a Hex Mesh Objectives: Create surfaces by Decomposing and Editing existing surfaces Create triparametric solids. Mesh triparametric solid with hex elements. PATRAN 302 Exercise Workbook - Release 8.0 10-1 10-2 PATRAN 302 Exercise Workbook - Release 8.0 LESSON 10 Preparing Geometry for a Hex Mesh Model Description: In this exercise, you will create a new database and then import CAD geometry. You will create several new surfaces by decomposing and editing some existing surfaces to complete the model. Decomposition of the CAD geometry is required when IsoMeshing a solid. IsoMeshing requires that the solids must have 5 or 6 faces. Thus, one needs to decompose the n-edged surface into a number of 3- or 4-edged surfaces to create 5- or 6-faced solids. Shown on next page is a drawing of the surfaces you will be decomposing and suggested steps for their constructions. Session files will also be used to complete some of the geometry. You will also create curves using the Point method, edit surfaces using the Break and Edge Match option. After the solid model is completely decomposed into triparametric solids, you will mesh the completed solid model with hex elements.