食品安文档资料全法案.pdf

Principles of meat processing technology 37 Another accelerating or “catalytic” effect is the addition of ascorbic acid, which slightly lowers the pH of the meat mixture. However, the dosage of ascorbic acid must be low (0.05%), just to provide the slightly acid conditions for the reduction of NaNO2 to NO. A pronounced reduction of the pH would negatively affect the water binding capacity of the product Fig. 62: Adding of nitrite curing salt which is not desirable. during initial phase of meat mix fabrication Curing of entire meat pieces Besides the curing of chopped meat mixtures, entire pieces of muscle meat can be cured. However, due to size the curing substances cannot instantly react with the meat pigments as is the case in chopped meat mixes. Hence various curing techniques are applied. The final products of curing entire meat pieces are either cured raw fermented products or cured cooked products (see page 98). The curing system to be used depends on the nature of the final product (uncooked or cooked). There are two systems for curing entire meat pieces, dry curing and wet curing (“pickling”) and the type of the final product determines which system will used. In dry curing a curing mix is prepared containing salt or nitrite curing salt, together with spices and other additives. The pieces of meat are rubbed with this curing mix (Fig. 63, 64, 214, 215) and packed in tanks. The curing mix gradually permeates into the meat, which can be a lengthy process ranging from several days to several weeks. For more detai