- 7
- 0
- 约4.8千字
- 约 9页
- 2019-08-21 发布于河北
- 举报
LTE-TDD随机接入过程(三)-RAR(MSG2)以及MSG1的重传
本文涉及到的内容有:
(1)UE在什么时候开始接收RAR
(2)怎么确定RA-RNTI
(3)UE没有收到RAR后的处理
(4)RAR的格式
1.UE监测RAR
文章《 LTE-TDD随机接入过程(2)-前导码Preamble的格式与时频位置》已经详细说明了UE发送Preamble前导码的时频位置。当UE发出Preamble后,并不是立即准备接收RAR(Random Access Response),而是在发送前导码之后的第3个子帧之后才开始准备接收RAR。当然,UE也不可能一直等待RAR,如果UE连续检测了ra-ResponseWindowSize个子帧仍然没有收到RAR,则不再继续监测RAR信息。
the UE shall monitor the PDCCH for Random Access Response(s) identified by the RA-RNTI defined below, in the RA Response window which starts at the subframe that contains the end of the preamble transmission plus three subframes and has length ra-ResponseWindowSize subframes.
ra-ResponseWindo
原创力文档

文档评论(0)