重卷卷边机液压系统设计文章幻灯片资料.docVIP

PAGE 辽宁科技大学本科生毕业设计 第 PAGE 32页 1 重卷卷边机液压系统设计 摘 要 在带钢冷轧生产线上，废边的卷取不仅影响带钢的质量和产量，其大量堆积还会损坏到设备，给机组的稳定运行带来严重影响。另外，废边是冷轧生产后的废料，以节约资源的角度来看，废边重卷是资源回收的第一步。因此对重卷卷边机液压系统进行研究和分析具有很重要的现实意义和经济意义。参照鞍钢冷轧2#生产线重卷机组的实际情况，本文对卷边机液压系统进行设计。系统由阀控制液压缸运动，从而使重卷机组运行时，卷边机同时进行工作。本文分析了阀控缸各环节的工作情况，以及一些重要参数对系统稳定性和精度的影响，列出相应计算式，计算各需求参数。通过分析，液压系统能够同时满足稳定性、快速性和准确性的要求。本文就液压系统进行了设计，确定了液压系统原理图，对液压动力元件、阀件和辅件进行计算和选用，对阀台等液压元件进行设计，并通过计算液压系统的压力损失、散热能力来对液压系统进行验算。结果证明，所设计的液压系统满足了设计要求。 关键词：冷轧；卷边机；液压系统 The Design of Hydraulic System of Re-roll machine Abstract In the production line of the cold rolling, re-rolling not only seriously affects the quality and yield of the strip, but also seriously damages equipments, even have a serious impact on the stable operation of generating units, so study and control the system have a very important practical and economic significance.According to the actual situation of No.2 cold-rolled production line of Anshan Steel Company, this paper designed the hydraulic control system of rerolling. In the system，we use servo valve to make the cylinder move. Contents includes analyzing every part’s work and stress status in cylinder controlled by value units as well as influences that some key parameters made to system stability and precision. Through the analysis, we found the control system can simultaneously meets the requirements of stability, speed and accuracy. This paper has also carried on the design of hydraulic system, established the hydraulic system schematic diagram, calculated and selected the hydraulic power parts, the valves and auxiliary parts, designed hydraulic elements such as valve block, checked the hydraulic system by calculating its loss of hydraulic pressure and the cooling capacity. Checking results show that the design of the hydraulic system meet the design requirements. keywords：Cold rolling；Re-roll machine；Hydraulic system 目 录 TOC \o 1-3 \h \z \u 摘 要 I Abstract II 目 录 III 1绪论 1 1.1 国内外冷轧生产简介 1 1.2 重卷卷边机的作用和工作目