NETAPP存储防火墙端口-典型NAS环境下的网络需求.docVIP

. . 网络需求 所有需要执行SnapMirror数据复制的存储之间，需打开以下端口： 协议 UDP端口 TCP端口 SnapMirror 10565 10566 NetApp FAS存储支持通过网络同步时钟。如果存储和NTP服务器之间有防火墙，则打开以下端口： 协议 UDP端口 TCP端口 NTP/SNTP 123 123 TIME/RDATE 37 37 所有被管理的存储，必须通过IP网络与DFM服务器连通。 如果存储和DFM服务器之间有防火墙，则打开以下端口： 协议 UDP端口 TCP端口 HTTP 80 HTTPS 443 RSH 514 SSH 22 TELNET 23 SNMP 161 SNMP TRAP 162 如果有Windows机器需要管理（例如，客户端安装了OSSV备份软件），则Windows机器需要通过IP网络与DFM服务器连通。 如果Windows机器和DFM服务器之间有防火墙，则打开以下端口： 协议 UDP端口 TCP端口 HTTP 4092 HTTPS 4093 NDMP 10000 SNMP 161 SNMP TRAP 162 启用DFM的autosupport功能，需要DFM服务器和邮件服务器连通；并且服务器需要一个不需密码验证的发送邮件的账号。 如果邮件服务器和DFM服务器之间有防火墙，则打开以下端口： 协议 UDP端口 TCP端口 SMTP 25 附录：DOT 7.2使用的IP端口 IP port usage on a storage system About this appendix ? This appendix describes the Data ONTAP services file that is available in the /etc directory. The /etc/services file is in the same format as its corresponding UNIX systems /etc/services file. Although this file is it not used by Data ONTAP, it is provided in this appendix as information useful to system administrators. Host identification ? Although some port scanners are able to identify storage systems as storage systems, others port scanners report storage systems as unknown types, UNIX systems because of their NFS support, or Windows systems because of their CIFS support. There are several services that are not currently listed in the /etc/services file. Below is an example of a complete list of the file contents. Service Port/ Protocol Description ftp-data 20/tcp # File transfer protocol ftp 21/tcp # File transfer protocol ssh 22/tcp # SecureAdmin rsh replacement telnet 23/tcp # Remote login (insecure) smtp 25/tcp # outbound connections for autosupport time 37/tcp # Time Service time 37/udp # Time Service domain 53/udp # DNS - outbound only domain 53/tcp # DNS zone transfers - unused dhcps 67/udp # DHCP server - outbound only dhcp 68/udp # DHCP client - only first-time setup tftp 69/udp # Trivial FTP - for netboot support http 80/tcp # HTTP license, FilerView, SecureAdmin kerberos 88/udp # Kerb