东莞松山湖小区3#栋基坑支护设计.pdfVIP

东莞松山湖小区3#栋基坑支护设计 摘要 东莞松山湖小区3#栋基坑工程为一常见的深基坑工程，基坑深度为12.5m， 基坑面积约为976.14 m2 。基坑所处地段地质情况较简单，地下水主要为基岩裂 隙水，根据资料分析，基岩裂隙水含量较少。基坑周围没有其他建筑物，三侧 与公路相邻，但是有少量的网线布置。 根据设计资料和相关规范，并结合场地的实际情况，先进行支护结构选型 ，最终选用的是单排桩加锚杆支护方案，然后采用朗金土压力理论计算土压力 ；再进行基坑的支护结构设计与验算，其中用理正深基坑软件进行辅助计算； 随后要设计基坑水处理方案，采用截水帷幕和集水井对基坑进行止水排水；基 坑监测的内容包括基坑周边地面沉降、地下水位、支撑内力、支护桩内力、锚 杆拉力以及支护结构变形等；最后进行基坑工程量的计算。 关键词：深基坑；基坑支护；单排桩；锚杆 Songshan Lake Community Foundation Pit No.3 Building Design Abstract Songshan Lake district 3 # Building Foundation is a common deep excavation, the depth of which is 12.5m and pit area is about 976.14m2 . Geological conditions in the area is relatively simple and groundwater is mainly bedrock fissure water.According to data analysis, there is little bedrock fissure water content. There are not other buildings around the pit, three sides of the pit adjacent to the highway, but there are some lines layout. According to the design data and related specifications, combined with the actual situation of the site, the first step is the supporting structure selection, we chose a single row pile of bolt support and use Rankine earth pressure theory to calculate earth pressure.Then designing the support structures and checking the pit, we use Lizheng Deep Foundation software to support calculations; To design a pit water treatment scheme, adopt Curtain and sealing the set of wells were drained to pit.Contents include excavation monitoring around foundation subsidence, groundwater level, brace force, supporting pile internal force, bolt tension and deformation of the supporting structure; Finally, the calculation of foundation pit engineering quantity. Key