半刚性框架_槽钢十字形约束钢板剪力墙结构抗震性能试验研究.docxVIP

建筑结构学 建筑结构学报 Journal of Building Structures 第 35 卷 第 6 期 2014 年 6 月 Vol. 35 No. 6 June 2014 008 半刚性框架-槽钢十字形约束钢板剪力墙结构 抗震性能试验研究文章编号: 1000-6869( 2014) 半刚性框架-槽钢十字形约束钢板剪力墙结构 抗震性能试验研究 于金光1，2 ，郝际平1，2 ，宁子健1 ，刘 春1 ，崔阳阳1 ( 1． 西安建筑科技大学 土木工程学院，陕西西安 710055; 2． 西安建筑科技大学 西部建筑科技重点实验室，陕西西安 710055) 摘要: 为研究半刚性框架-槽钢十字形约束钢板剪力墙结构的抗震性能，通过一榀 1 ∶ 3 比例单跨 3 层半刚性框架-槽钢十字 形约束钢板剪力墙的拟静力试验，研究半刚性框架与槽钢约束墙体的相互影响，分析结构的承载力、刚度、耗能和节点转动 能力等。试验结果表明: 该结构具有良好的耗能能力，半刚性框架和墙板协同工作良好，墙板的设置显著降低梁柱节点的 延性要求，避免梁柱刚性连接在强震作用下的脆性破坏; 槽钢构件的设置可改善钢板的受力性能，提高墙体的承载力和刚 度，有效减少滞回曲线的“捏缩”现象，降低薄板墙的噪音及震颤，内填板以小区格内的局部屈曲为主，试件面内呈弯剪破坏 模式。 关键词: 半刚性钢框架; 钢板剪力墙; 槽钢十字形约束件; 拟静力试验; 抗震性能 Experimental Experimental study on seismic behavior of semi-rigid connection steel frame-unbonded cross buckling-restrained steel plate shear wall YU Jinguang1，2 ，HAO Jiping1，2 ，NING Zijian1 ，LIU Chun1 ，CUI Yangyang1 ( 1． School of Civil Engineering，Xi’an University of Architecture and Technology，Xi’an 710055，China; 2． Key Laboratory of Western Architecture，Xi’an University of Architecture and Technology，Xi’an 710055，China) Abstract: In order to study the seismic behavior of the semi-rigid connection steel frame with unbonded cross buckling-restrained steel plate shear walls，a one-third scale，one-bay and three-story experimental specimen of semi- rigid connection steel frame with steel plate shear walls was tested under the quasi-static loading to determine some seismic properties，including the failure mode，hysteretic behavior，ductility and energy dissipation． The results show that the specimen exhibits excellent ductility，energy dissipation capacity and great safety margin; the stiffness degradation of the joints is not serious; the requirement of ductility and stress are distinctly lowered by arranging infill panels; the cooperative work between the frame and the steel plate shear wall is well; buckling-restrained element improves the force condition of steel panels，increases the stiffness and load-carrying capacity of panels，and lightens