短消息信令流程图.docVIP

短消息处理信令流程 短消息起呼流程 1.2短消息终呼流程 1.3短消息通知流程 1.3.1用户关机 1.3.2用户不可及 2.MAP相应参数 2．1 Cause Code: 0 Address vacant. SMS Destination Address isvalid but not currently allocated to an SMSterminal. The MIN associated with a validdestination address is not known to its HLR. 1 Address translation failure. The SMSDestination Address is invalid (e.g., address is not a recognized address type, address is not fora known or possible SMS unctional entity, the MIN associated with a destination MS addressdoes not correspond to its HLR, the ESN associated with a destination MS does not match the expected value, the SMS_Destination-Address, SMS_OriginalDestinationAddress,destination MIN, or original destinationsubaddress does not match the address of a destination SME, etc.). 2 Network resource shortage. Networktransmission failed due to lack of a network resource or link capacity. 3 Network failure. A network node failed, a link failed or a required operation failed. 4 Invalid Teleservice ID. The SMS_TeleserviceIdentifier is not known, is not supported or is not authorized by an addressed functional entity. 5 Other network problem. A network problem other than identified above. 6~31 Reserved. Treat the same as value 5, Other network problem. 32 No page response. The addressed MS-based SME is known, but it does not respond to a page. SMS Notification is not pending. 33 Destination busy. The destination MS-based SME is SMS capable, but is currently engaged in a call, a service or a call mode that precludes the use of SMS or the destination SME is congested. This value shall only be used between the MSC and the MC when allowed by bilateral agreement. SMS Notification is not pending. 34 No acknowledgment. The destination SME does not acknowledge receipt of the SMS delivery. This value may be used when terminal busy and no page response are not appropriate.SMS Notification is not pending. 35 Destination resource shortage. A required terminal resource (e.g., memory, etc.) is not available to proc