山东青岛市南某污水处理厂一期201306说明书.docVIP

摘 要 本文针对山东青岛市南某污水处理厂(一期)进行了设计计算。该污水处理厂是青岛重要的市政基础设施。该污水处理厂的一期建设规模：100000/d。 其中，进水水质：CODCr≤400mg/L，BOD5≤250mg/L，SS≤250mg/L，NH3-N≤42mg/L，TN≤65mg/L，TP≤10mg/L。 出水水质（一级A标准）：CODCr≤50mg/L,BOD5≤10mg/L，SS≤10mg/L，NH3-N≤5mg/L，TN≤15mg/L，TP≤0.5mg/L。 本文根据其进水水质、水量及出水情况，分析比较了各种污水处理工艺，确定该污水处理厂采用工艺，产生的污泥经浓缩、消化、脱水后外运。 主要设计内容包括：污水处理工艺选择及各工艺单元的设计(包括工艺流程的确定及各单体构筑物的设计)；污泥处理工艺设计，(包括工艺流程的确定及各单体构筑物的设计)；三级处理工艺设计（包括工艺流程的确定及各单体构筑物的设计）；污水处理厂的平面及高程布置(包括污水处理厂处理构筑物和辅助构筑物的平面图及高程图的绘制)。 关键词：污水处理，倒置工艺，构筑物，设计 ABSTRACT In this paper, Qingdao, Shandong, south of a sewage treatment plant (a) for the design calculations. The sewage treatment plant is an important Qingdao municipal infrastructure. The sewage treatment plant aconstruction scale: 100000 / d. Among them, the water quality: CODCr ≤ 400mg / L, BOD5 ≤ 250mg / L, SS ≤ 250mg / L, NH3-N ≤ 42mg / L, TN ≤ 65mg / L, TP ≤ 10mg / L.Water quality (an A Standard): CODCr ≤ 50mg / L, BOD5 ≤ 10mg / L, SS ≤ 10mg / L, NH3-N ≤ 5mg / L, TN ≤ 15mg / L, TP ≤ 0.5mg / L. Based on its water quality, water quantity and water situation analysis and comparison of various sewage treatment process, to determine the wastewater treatment plant using technology, resulting sludge concentration, digestion, dehydration Sinotrans. Main design elements include: wastewater treatment process selection and the design of process units (including the process of determining the design of each monomer structures); sludge treatment process design (including the process of determining the design of each monomer structures) ; tertiary treatment process design (including the process of determining the design of each monomer structures); sewage treatment plant horizontal and vertical layout (including sewage treatment plant structures and ancillary structures, floor plan and elevation mapping). KEY WORDS: sewage treatment, inversion processes, structures, design. 目录 TOC \o 1-3 \h \u 13827 摘 要 I 31724 ABSTRACT II 7153 目录 III 26259 前 言 1 18119 第一章 城市污水处理厂工艺说明 2