cisco常用配置命令.docxVIP

cisco常用配置命令 Cisco AP configuration method mainly has the console port log in, remote login (such as Telnet/SSH), a Web browser, etc?，after the two ways are all need to get or set a IP to login. In general, the method for setting the IP address of an AP is obtained by defauIt, configured by DHCP, using IPSU (IP Setup Utility), and using the console port? In fact, for Cisco AP, the easiest way to configure it is to use a Web browser method, GUI. Cisco AP has two basic GUI interfaces, one for IOS GUI, such as Arionet 1100; One is the VxWorks GUI, such as the AP and bridge of Arionet 350. The Ari