OTT2001A IIC协议指导stm32f407开发板资料手册.pdfVIP

OTT2001A OTT2001A Touch Application Note Touch Application Note I2C Protocol Guide I2C Protocol Guide Preliminary Aug. 20, 2013 Solution Depot Limited I2C Protocol Guide Table of Content 1 Introduction3 2 I2C Interface Protocol4 2.1 Timing Characteristic 4 2.2 I2C Buffer and Data Format5 2.3 Function Description 6 2.4 Operation Definition7 2.4.1 I2C R/W Timing Table 7 2.4.2 Touch event8 2.4.3 Setting TP On/Off 9 本资料问新励科技专有之财产，非经书面许可，不准透露或使用本数据，亦不准复印、复制或转变为任何其它型式使用。 The information contained herein is the exclusive property of Solution Depot Limited. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Solution Depot Limited. Page 2 of 9 Solution Depot Limited I2C Protocol Guide 1 Introduction The OTT2001A, a 208 channels capacitive touch driver LSI, is designed for up to7” passive matrix touch module. When users touch module by finger, the module can send coordinates of point at the contact point to host. The finger position information is sent to host by I2C bus which is determined by host through INT line. The purpose of this guide is to introduce the I2C protocol in detail. 本资料问新励科技专有之财产，非经书面许可，不准透露或使用本数据，亦不准复印、复制或转变为任何其它型式使用。 The information contained herein is the exclusive property of Solution Depot Limited. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permissio