戴克伊GDT基础资料课件.ppt

戴克伊GDT基础资料;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;GDT in the United States GDT在美国 ASME (American Society of Mechanical Engineers) Y14.5 (the standard number) M (Metric) -2009 (the year the standard was approved) is a revision of ASME Y14.5M-1994 ASME （美国机械工程师协会） Y14.5 （标准编号） M （公制） - 2009（标准批准年份）是ASME Y14.5M-1994标准的升级版 The ISO and ASME Y14.5M dimensioning standards are currently 80-90% common. ISO标准和ASME Y14.5M标准目前有80-90%相同。 ;ASME and ISO Dimensioning Standard Comparison ASME和ISO标准比较;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy介绍GDT组成层级;CH1 – Introduction to the GDT Hierarchy 介绍GDT组成层级;CH2 – Features, Rules and Concepts of GDT 形体、规则和概念; Figure 2-1 Examples of Features (This part has seven features 这个零件有7个形体);Features of Size 尺寸形体 - A feature of size (FOS) is one cylindrical or spherical surfaces, or a set of two opposed elements or opposed parallel surfaces associated with a size dimension, such as, the diameter of hole, or shaft. 一个尺寸形体是一个圆柱面、球面、或一组两个相对的平行的元素或表面，且由一个尺寸连接。如：孔径或轴径。 - Contains opposing elements or surfaces. 包含相对元素或表面。 - Can be used to establish an axis, median plane, or centerpoint. 能被用来建立轴心线、中心面或中心点。 - Is associated with a size dimension. 用一个尺寸连接。 - Every feature of size contains one or more features – surface(s) – within it. A cylindrical FOS contains one feature: the cylindrical surface. A planar FOS is a FOS that contains two feature: the two parallel plane surfaces. 每个尺寸形体包含一个或两个形体（表面）。一个圆柱尺寸形体包括一个表面。一个平面尺寸形体包括两个形体：两个平行平面表面。 - Usually (99% of the time), the opposing elements will both be the same type, for example, t