HPc7000安装(值的看一下).pptVIP

Implementing HP BladeSystem Installing the HP BladeSystem c7000 Enclosure and Infrastructure Rev. 7.31 Instructor notes After you power on the enclosure, the Insight Display provides the first access to the enclosure. Remote configuration is not possible until after you run the Insight Display Initial Setup Wizard. The Insight Display Initial Setup Wizard enables the local rack technician to perform the following steps: Select the Power Mode. Set the Limit AC Watts option. Choose a Power Savings mode. Assign the Onboard Administrator IP addresses. Name the enclosure and rack. Assign an Insig