毕业设计（论文）-年产1000万件聚丙烯脸盆注射模具设计.docVIP

摘要 洛阳理工学院毕业设计（论文） PAGE IV PAGE I 年产1000万件聚丙烯脸盆注射模具设计 摘 要 此次主要是对PP（聚丙烯）塑料脸盆进行模具设计，脸盆要求表面光洁，没有顶出的痕迹，脸盆采用的成型方法为注射成型，注射成型是把塑料在料桶内加热塑化至熔融状态，在柱塞或螺杆的推动下通过注塑机的喷嘴注入模具型腔内的一种成型方法。日常生活中的大多数塑料产品都是通过注塑成型生产而来。随着科学的发展，如何提高脸盆的质量和成型效率，成为我国模具行业的一项重要课题。 借助AutoCAD（CAD）和Unigraphics NX（UG）平台，首先通过UG绘制出脸盆模型，再通过制图模式转换成三视图导出dwg格式，用CAD打开后进行排位设计。排位完成后，再把组立图导入到UG软件进行3D设计。3D设计首先通过UG软件进行分析以确定分型面，确定分型面之后，再利用布尔运算和拆分功能，得到型芯和型腔，下一步再加载模架，设计浇注系统、冷却系统、排气系统等，最后加载锁模块等其他标准零件。3D设计完成后，把型芯、型腔等部件转换为dwg格式到CAD中，画出标准的图框，再进行标数，这样就完成了散件图的设计。整个过程中采用了燕秀工具箱和HB_MOULD，提高了模具设计的速度。 通过对模具冷却系统和排气方式等各方面优化，提高了成型效率和质量，减小了制件的缺陷。为企业能获取更大利润和用户带来更好的产品体验具有重要的作用。 关键词：脸盆，注塑模具，AutoCAD， Unigraphics With an annual output ofpieces of?polypropylene?washbasin?injection mould design ABSTRACT This design was mainly for PP (polypropylene) plastic washbasin mold, the washbasin requires a smooth surface, could not have the top of the trace. the molding method of washbasin used an injection molding, the plastic injection molding is plasticized in the barrel heated to a molten state, A method of forming which is pushed by the plunger or screw inject in the mold cavity under the injection molding machine through a nozzle. The most plastic products of daily life are coming by injection molding production. with the development of science, how to improve the quality and efficiency of the washbasin forming have become an important topic of Chinas mold industry. With the AutoCAD (CAD) and Unigraphics NX (UG) platform, firstly drawn the model of washbasin by UG, and then converted by a three-view drawing mode export dwg format, designed to rank after open CAD. After the completion of ranking, then imported legislature Figure into the UG group conduct the 3D design . 3D design first by UG software analysis to determine the parting surface and after determine the parting surface, the Boolean operations and split function, the core and cavity, a loading frame, design of gating system, cooling system, exhaust system, loading the fi