BE多层共挤吹膜机冲料程序.docVIP

  • 2
  • 0
  • 约4.27千字
  • 约 4页
  • 2019-09-25 发布于浙江
  • 举报
Purge procedure, materials and operating temperatures 吹膜设备冲料程序 Material in the die模头内的原料 Purge Material冲洗原料 Typical operating temperatures [oC]典型操作温度 Z1 Z2 Z3 Z4 LDPE Shut down layer/ line with LDPE以LDPE关闭层或生产线 180 200 195 200 HDPE Use 0.3 ~ 0.5 MI LDPE until LLDPE is completely out. No need to purge system if HDPE is going to be run the next day使用0.3~0.5MI的LDPE直至LLDPE完全清出,如第二天仍要运行,就不用冲洗系统 205 220 210 205 LLDPE Use 0.3 ~ 0.7 MI LDPE until LLDPE is completely out.用0.3~0.7MI的LDPE,直至LLDPE完全清出 205 220 210 205 NYLON 1. Increase temps 10 degrees C before introducing purge resin. Purge resin may be 0

文档评论(0)

1亿VIP精品文档

相关文档