第7章定时部件.pptVIP

定时器应用举例 #define BIT_TIMER0 (0x110) int variable0,variable1,variable2,variable3,variable4; void __irq Timer0Done(void) { rSRCPND = BIT_TIMER0; //Clear pending bit rINTPND = BIT_TIMER0; //Clear serve bit variable0++; } void __irq Timer1Done(void) { rSRCPND = BIT_TIMER1; //Clear pending bit rINTPND = BIT_TIMER1; variable1++; } rINTPND; //Prevent an double interrupt pending #define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48)) #define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4c)) void Test_TimerInt(void) {